Print Waters Corp LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and PTFE/Silicone Septum, 1 mL Volume, 100/pk Manufacturer: Waters Corp 186000384C Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry. Catalog No. 50-782-514 $212.04 / Pack of 100
volume 2 mL, clear glass vial, PTFE/silicone septum: Expand. Hide. 29058-U: Aluminum cap and red PTFE/silicone septum, for autosampler vials 12 x 32 mm standard ...
The septum you choose for your autosampler vial can impact sample evaporation, sample security, needle bending and blockages, and instrument down time. Don’t let the complexities of septa selection slow you down. Use the simple online Thermo Scientific Septa Selection Tool. Just answer a few questions to discover the best septa for your instrument and application to choose wisely.
PTFE/High Performance Rubber is a highly pure synthetic red rubber septum that provides a reduced background level for specific GC applications, employing sensitive detectors such as ECD or NPD. PTFE/Silicone Septa (T/S) has high-quality, low background/blank value, 100% synthetic pure silicone septa. 73 results were found.
Precleaned Vials. Our precleaned, Type 1 borosilicate clear or amber glass vials are washed in non-phosphate detergent, rinsed three times with tap water, and rinsed with ASTM Type-1 organic-free water to remove detergent. Post cleaning, vials are assembled with PTFE/silicone septa and open-top polypropylene caps.
Aijiren's 2 mL crimp vials and 11 mm crimp vial caps are the perfect fit for HPLC and GC autosamplers across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
Vials Units per Package 100 pk SKU: 186007203C LCGC Certified Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and PTFE/Silicone Septum, 1 mL Volume, 100/pk Category: VialsContainers&CollectionPlates Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.
PTFE/silicone – ST101, ST14 • A very pure soft silicone laminated to PTFE. Septum resists coring and is recommended for instruments with fine gauge needles • Also recommended for LC-MS and GC-MS due to high purity PTFE /silicone – ST143, ST144 A very soft silicone laminated to PTFE. Use with flexible needle PTFE /silicone/PTFE – TST1
8-425 Screw Top Vials, Caps and Septa The original, smaller opening vials with an 8-425 thread size screw cap are availablewith black caps and a variety of septa to meet the needs of your application. 8-425 thread design Original, narrow neck size 8-425 Screw Top Vials 8-425 Screw Caps and Septa Microvolume Inserts
make PTFE/silicone septa suitable for all types of chromatographic applications. A thin film of PTFE is laminated to the side of the septum that faces the sample to limit exposure of the elastomer to the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/Silicone Septa
LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume, 100/pk. As a leading manufacturer of analytical instrumentation and consumable products, Waters knows how important it is to choose autosampler vials that enhance the performance of your other instrumentation.
1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top Related Products: 1.5ml Vials Compare this item Storage Vial Convenience Kits, Open Top w/ Septum National Scientific
High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical. PTFE/Silicone septa are offered in a
Chromatography vials are containers used to transport your sample matrix to the instrument prior to injection. Aijiren offers a broad range of chromatography vials in a variety of volumes, material compositions, and closure types to meet the specific needs of a wide range of applications. The design of Aijiren vials, inclusive of form, fit and
Catalog number: 8-6RT1. Thermo Scientific™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. Choose from Thermo Scientific™, Thermo Scientific™ National™, and Thermo Scientific™ Chromacol™ brands. Limited warranty period: Subject to all