Vials, vial inserts, septa, and caps/closures with or without septa for use with autosamplers and autosampler vials; includes a variety of sizes, WATERS CERTIFIED SAMPLE VIALS - HPLC eShop. WATERS CERTIFIED SAMPLE VIALS chemical durability and heat shock are not factors. PTFE/Silicone septum bonded to the polypropylene cap, using.
It’s easy to think of vials as simple, inexpensive components that don’t affect your results. However, substandard vials, caps, and septa can lead to sample loss, contamination, and damaged autosampler needles. Aijiren understands that vials are a critical part of your analytical workflow—no less important than the column or the instrument.
PTFE/Silicone Septa: (T/S) PTFE/Silicone is the most versatile septum material offered in various formulations to address specific applications requirements. Extractables from PTFE/Silicone septa are generally at lower levels compared to other resealable materials. PTFE/Silicone septa are formulated for different hardness (durometer)
HPLC Chromatography Vial, 2mL CLEAR Glass vial with Writing Area, Flat Base w/ graduations, 9-425 Open Top Ribbed Screw Cap with 9mm White PTFE/Red Silicone Septa 1mm Thick, w/ intergrated 0.2mL MIRCO-INSERT, Vial size: 12 x 32 mm, 100/pk CV5700 See full list on alkalisci.com
Available as both clear glass vials or amber glass vials , open top screw caps with PTFE/silicone septa, or PTFE lined storage screw caps that offer broad chemical resistance. Our storage screw top vial kits are used extensively in environmental, food, and pharmaceutical applications.
Bonded Clear PTFE/Clear Silicone, Pre-slit MSCERT4000-36LVW 100 The LC/MS chromatograms for the control and the MS Certified Vials are very similar, Get Price Sample Handling - Vials and Closures
MS certified bonded septa HPLC vials Vials in glass, septa and caps, we developed Verex HPLC / GC vial products with high quality materials to Certified and special MS-certified (caps and vials).
Certified MSQ Certified especially for mass spectrometry (mass spec quality). Designated “Cert+ MSQ” Septa Compatibility Material Compatibility Incompatibility Resealability Max. Temp. PTFE/Silicone PTFE: inert to virtually all chemicals. ACN, benzene, chloroform, heptane, hexane, pyridine, THF, toluene Excellent 200°C PTFE/Silicone/PTFE
discounting certified PTFE and silicone hplc vial septa for . ultra clean EPA vials cap and septa-Voa Vial Supplier Septa cap vials | Sigma-Aldrich black polypropylene hole cap, thread for 8-425, PTFE/silicone, Top Hat (septa and closure designed to fit together tightly), for use with 2 mL vial, 4.6 mm opening, pkg of 100 ea. Pricing. 27262. black polypropylene hole cap, 8-425 thread, PTFE
The associated 9 mm vial screw cap comes with your choice of septa constructed from either PTFE/silicone, PTFE/silicone/PTFE or PTFE/natural red rubber. Our screw vials and vial screw caps are designed for both HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels
Natural PTFE/blue silicone – ST3, ST201 Best septa choice when temperatures are over 125°C. Natural PTFE/red silicone – ST3HT High temperature formulated seal with low bleed. Best septa choice when temperatures are up to 300°C. Blue silicone/red PTFE – ST144 Thin 1.4 mm seal with PTFE face.
Certified LC-MS Kit % 0 100 Scan ES+ 5.98e9 Verex Certified MSQ Kit % 0 100 Scan ES+ 5.98e9 Company A Certified LC-MS Kit % 0 100 Scan ES+ 5.98e9 Soak Blank m/z 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 % 0 100 Scan ES+ 5.98e9 Company C Certified LC-MS Pre-Cleaned Kit % 0 100 Scan ES+ 5.98e9 Company B
Replacement or Alternative for TFCERT5000-193W, TFCERT5000-93, TFCERT5000-93W, TFCERT5000-S93WMeet your certification and documentation needs with our Level 3 Thermo Scientific™ SureSTART™ HPLC and GC Certified Screw Vial and Cap Kits. Select Level 3 products for ultimate performance and sensitivity from your methods, while maintaining the highest levels of sample security and integrity
The PTFE/Silicone septum will aid with multiple injections and sample storage due to the superior resealing capabilities. Until punctured, these vials have PTFE chemical resistance, and then the septum offers the chemical compatibility of silicone. This allows for a working temperature of -40 C to 200 C.
PTFE/red silicone HPLC sample vials low protein bindingShimadzu’s Guide to Vial Selection. Temperature limit for PTFE/Silicone septa: -60°C up to 200°C Part number Cap Septa Mater