Gravimetric Analysis Membrane Filter, 0.22 µm, mixed cellulose esters with thin pad, 37 mm, white. A 0.22 µm pore size non-sterile filter validated for air monitoring. With biologically inert mixtures of cellulose acetate & cellulose nitrate, MF-Millipore membranes are widely used in analytical & research applications.
Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.
0.2 Micron, Emflon® PFAW Hydrophobic Membrane Filter Cartridges For Bioburden Reduction in Dry Gases Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for reliable reduction of particles and microorganisms in compressed gas and vent applications.
A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. SDS CoQ SLFG05010 10 Price could not be retrieved Recommended Products Overview
Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane. Mitex™ membrane is hydrophobic.
Labware. Laboratory equipment, glassware, and plasticware are essential for the success of any laboratory. Through our partnerships with brands you know and trust, we offer a wide selection of laboratory equipment and supplies to support more than 100 areas of interest. Cell Culture & Cryogenics. Filtration.
Zoom A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. CoQ SLFG025LS 50 Price could not be retrieved Recommended Products Overview
Omnipore Membrane Filter, 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter 0.2 μm pore size 80 % porosity Page 1 of 24 Membrane Filter Characteristics Chemical Compatibility: The filter material must be compatible with the chemical nature of the substance being filtered to avoid structural failure.
Download. Zoom. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. SDS.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
SLLGC13NL Millipore Millex Syringe Filter, Hydrophilic PTFE, Non-sterile Download Zoom 0.20 µm pore size, 13 mm diameter, Millex-LG hydrophilic PTFE membrane, ion chromatography certified MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. CoQ View Products on Sigmaaldrich.com SLLGC13NL
Millex-LG for Samplicity G2, 0.20 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
