Feb 17, 2020 · PTFE Hydrophilic Syringe Filters 0.2 or 0.45um Resisting nearly all corrosive chemicals makes PTFE syringe filters an ideal choice. However, natural hydrophobic PTFE has it’s disadvantages not letting aqueous solutions passing through while many of these chemicals are diluted with water.
Syringe filter sizes can accommodate sample volumes from < 2 to 200 mL. For viscous or particulate laden solutions it is possible to improve throughput by using Pall’s syringe filters using a built-in prefilter. Gamma-irradiated individual blister packs ensure sterility.
PharmAssure Syringe Filters with Supor Membrane. Single use. Supor polyethersulfone membrane. Maximum operating pressure: 75 psi (5.2 bar) Non-pyrogenic. Sterile. Minimal retention volumes: 50 µL for the 25 mm and < 100 µL for the 32 mm filter.
The typical cash cost of Syringe Filter 0.2 Micron/32mm without health insurance is $33.00 per 30, 1 Box Miscellaneous but you can save using a SingleCare Syringe Filter 0.2 Micron/32mm coupon to pay only $368.94 for 30, 1 box Miscellaneous of Syringe Filter 0.2 Micron/32mm.
Acrodisc® Syringe Filters Optimized for Scale Up, 25 mm - 0.8/0.2 µm, Supor membrane, sterile (50/pkg) Product ID: 4905 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 209.33 / EA. Add to Cart.
These Corning® syringe filters have acrylic copolymer housings, female Luer lock inlets and male Luer slip outlets. Polyethersulfone (PES) membranes provide the fastest flow rates, low protein binding and low extractables 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL sample size. Inlet: Female Luer-Lok™. Outlet: Male Luer slip. Polypropylene housing with ID color rings. Pore size and membrane type printed on unit.
Corning syringe filters are 100% integrity tested and are certified nonpyrogenic and noncytotoxic and are manufacturered in accordance with ISO 9002 standards. A variety of membranes are available to meet your needs. PES for low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA) for the lowest protein binding; PTFE
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2 0.1µm to 5µm pore sizes Low adsorption characteristics Shop Minisart ® NML Syringe Filters
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Individually packed and sterile Minisart ® High Flow syringe filters are optimal for immediate usage whenever sterile filtration or clarification and cell removal under sterile conditions is needed. Due to the slightly asymmetric membrane structure, the PES surface almost behaves like a pre-filter and enables highest flow rates.
Description. Syringe Filters with High Flow Rates and Low Protein Binding 0.2 µm, 25 mm (50/pkg). Superior flow rates and higher throughputs than competitive devices., Pall Acrodisc Syringe Filters with Supor Membrane, Sterile Filtration, 25 mm (50/pkg) “Pall Laboratory products are designed for laboratory applications only.