Filter Media: PTFE on a polypropylene support Housing: Polypropylene Filter Diameter 50 mm Effective Filtration Area 19.6 cm2 Typical Air Flow Rates 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa
GVWP04700. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.
Filter Media: PTFE on a polypropylene support Housing: Polypropylene Filter Diameter 50 mm Effective Filtration Area 19.6 cm2 Typical Air Flow Rates 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa
Our LifeASSURE™ PFS Series PTFE Filter Cartridges combine flow-enhancing construction with a liquid‐validated, bacteria retentive, hydrophobic PTFE filter membrane, providing excellent air flow rates using small assemblies. Our filters are used for applications requiring 0.2 micronsterilization of air, gas, solvents and chemicals in life science industries.
Catalogue Number. GVWP04700. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
0.22 μm pore size 85 % porosity Description General description Filter Code: FGLP Filter Type: Screen filter Our Fluoropore ® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
0.2 µm Filter Diameter ⌀ 47 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11806 25 Item no. 11806-100------G Pore Size 0.45 µm Filter Diameter ⌀ 100 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11803 100 Item no. 11803--13------N Pore Size 1.2 µm Filter Diameter ⌀ 13 mm $329.00 Hydrophobic PTFE Membrane Filters / Type 11806 100
Features & Benefits: - Biologically and chemically inert - High porosity yields high flow rates - Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples Applications: - Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy
1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all others
Description. Acro 50 In Line Vent Devices with PTFE Membrane, 0.2 µm, 50 mm Filters with Superior Performance for Demanding Applications. For Venting bioreactors, fermentation tanks, and carboys., Pall Acro 50 In Line Vent Devices with PTFE Membrane, 0.2 µm, hose barb (18/pkg)
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high
Sartopore® 2 Capsule 0.2µm | Sartorius Sartopore® 2 Capsule 0.2µm Tech Support Documents Sartopore ® 2 is the industry standard of high-performance polyethersulfone (PES) liquid filters. A broad variety of different pore size combinations ensures highly economic and safe filtration performance.
0.2 µm µm nominal Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)
