The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.
Odm Kosma Made High Performance Double Layers 0.45+0.2 Um Code 7 Hydrophobic Ptfe Pleated Filter Cartridge , Find Complete Details about Odm Kosma Made High Performance Double Layers 0.45+0.2 Um Code 7 Hydrophobic Ptfe Pleated Filter Cartridge,Odm Kosma Hydrophobic Ptfe Pleated Filter Cartridge,Double Layers 0.45+0.2 Um Hydrophobic Ptfe Pleated Filter Cartridge,High Performance Double Layers
Unlaminated PTFE Membrane Filter Applications. Chemicals, Petrochemicals, and Fertilizers; Computers, Semiconductors, and Electronics; Food and Beverage; Glass and Glass Products; Healthcare, Hospitals; Metals and Metals Fabrication, Mining (Coal, Minerals, Metals) Pharmaceutical and Medicine; Power Generation; HPLC
Fluoropore Membrane Filter 0.22 µm pore size, hydrophobic PTFE, 47 mm membrane; Synonyms: Hydrophobic PTFE membrane filter discs,Hydrophobic Polytetrafluoroethylene membrane filter discs; find Millipore-FGLP04700 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Bellco Glass. The ptfe 50mm Acrodisc hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Do not.
Inlet/Outlet Connections. Stepped hose barbs, 6.4-12.7 mm (1/4-1/2 in.) diameter. Connections have internal taper design to accept male slip luer. The 0.2 μm pore size devices are available with 1/8 in. MNPT or 3/8 in. (9.5 mm) OD straight type connections. The 1 μm pore size device is also offered with a 1/8 in. MNPT connection.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Foxx Life Science Carboy Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave cycle of EZgrip® carboys.
PTFE membrane filter has excellent chemical stability, resistance to organic solvents and strong acids, corrosion resistance; high-temperature resistance, and low protein binding ability. Smooth surface, high filtration efficiency, and wide application range. See full list on hawachmembrane.com
Sterlitech PTFE filter capsules are well suited for critical applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45 and 1.0 micron is required. FEATURES AND BENEFITS Naturally Hydrophobic PTFE Membrane Wide Chemical & Thermal Compatibility Low Filter Extractables Quality Manufacturing PTFE Capsule Filter Applications:
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high
The ptfe 50 mm Acrodisc hydrophobic filter with hose barbs can be used to sterilize non-aqueous solutions, vacuum line protection, venting and gas filtration. Hose barb end allows easy secure attachment of silicone tubing or other types of tubing. The filter is non sterile and is autoclavable. Has. Compare this item.
