Membrane filters are typically composed of polymers that have been chemically processed, resulting in highly porous thin films with microscopic pore structures. Membrane filters typically have absolute pore size ratings <1µm, with some exceptions.
Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency.
0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet View Products on Sigmaaldrich.com JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain Price could not be retrieved
PTFE Unlaminated Membrane Filters. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated
Filter PTFE Membrane 0.2µm Pk5 DWK Life Sciences (Wheaton) Interchangeable hydrophobic membrane filter guarantees effective protection against airborne contamination during aspiration and dispensing. Related Products: Ptfe Membrane 0.2 Compare this item Filter membrane Nylon 47mm 0.20um 100/pk Aijiren Technologies
Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material.
Polyethersulfone (PES) membrane filters are hydrophilic membranes with high flow rate and low non-specific protein adsorption. These properties make them excellent for the filtration of aqueous solutions as well as various solvents and pharmaceutical solutions. Shop PES Membrane Filters Now Regenerated Cellulose (RC) Membrane Filters
Durable, efficient, and broadly compatible, these pure, hydrophilic PTFE membranes are ideal for use with HPLC seperations, aqueous/organic solvents, and many of your other filtration needs. Pack of 25. Pore size: 0.20 microns. Diameter: 90 mm. Advantec P/N: H010A090C.
Product Support. Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization* and liquid clarification. Polypropylene grid support material for increased strength. Temperature resistant up to 120°C. Resistant to most aggressive acids, alkalis, and
The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.
Whatman Nuclepore Polycarbonate Black Membrane Filter, 0.2 µm Pore Size, 25 mm Circle, 100 Pack, 110656 Regular Price $155.69 Price $135.38 Add to Cart Whatman Nuclepore Polycarbonate Black Membrane Filter, 0.4 µm Pore Size, 25 mm Circle, 100 Pack, 110657 Regular Price $140.48 Price $122.15 Add to Cart
PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks.
Membrane Filters Pall has a wide range of membrane filter products. Product images are a representation of product family for illustration purposes only. Actual products may vary. Overview Order Products Order Products 38 Results of total products Availability In Stock (5) Product Use Filtration (6) Viral Safety (6) Diagnostics (5)
