Solutions containing a known concentration of either 0.24 μm or 0.5 μm particles were filtered using 0.45 μm hydrophilic PTFE syringe filters and particle concentration in the final filtrate was measured to determine the average particle retention for each filter.
Choice PTFE (Hydrophobic) Syringe Filters, 0.2 µm, 13 mm, 100 Pk. Disposable: Yes: Material: PTFE (Hydrophobic) Material (Membrane) PTFE (Hydrophobic) Pore Size: 0.2 μm: Sterility: Non-sterile: For Use With (Application) HPLC, SPE: Housing Material: Solvent Resistent, Low-Extractable Polypropylene: No. per Pack: 100: Prefilter: No: Pressure
Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency.
The PSF syringe filter has larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. This gives the PSF syringe filter a much improved throughput and flow rate. PTFE PSF syringe filters are available with a multi-layered glass fiber prefilter (GxF) above the PTFE membrane.
PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Product Support. Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization* and liquid clarification. Polypropylene grid support material for increased strength. Temperature resistant up to 120°C. Resistant to most aggressive acids, alkalis, and
Hydrophobic PTFE Membrane Filters | Sartorius Hydrophobic PTFE Membrane Filters Tech Support The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. See more Products below Request a Quote*
Millex-LG for Samplicity G2, 0.20 µm, hydrophilic PTFE, 33 mm, non-sterile This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
0.2 µm Filter Media PTFE Minimum Bubble Point 1 bar Maximum Operating Temperature (Metric) 100 °C Unit of Measure PAC Min Order Qty 1 List Price $ 521.53 Add to Cart Add to Quote PTFE Membrane Disc Filters - TF 450, 0.45 µm, 13 mm (100/pkg) Product ID 66147 Removal Rating 0.45 µm Minimum Bubble Point 0.4 bar Unit of Measure PAC Min Order Qty 1
Corning™ Disposable Sterile Bottle-Top Filters with 0.22μm Membrane Designed for use on glass or polystyrene media bottles with 33 and 45mm neck sizes. Corning™ Disposable Sterile Bottle-Top Filters are ideal for filtration of tissue culture media and components, biological fluids, other solutions. 9 Cytiva Whatman™ Three-piece Filter Funnel
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. Millex-LG, 0.20 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. FAQs. User Guides.
This 13 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in clarification of aqueous & mild organic solutions for ion chromatography. Disposable syringe-operated filter units certified for ion chromatography sample Related Products: Disposable Filter Units Compare this item SLLGR04NL
0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain Price could not be retrieved Recommended Products Overview
0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet View Products on Sigmaaldrich.com JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain Price could not be retrieved
