Save to listAdd to cart. Choice Nylon Syringe Filter Specifications. Membrane: HPLC certified nylon. Maximum operating temperature: 100 °C. Housing: Medical grade, virgin polypropylene. Autoclave: Sterilize by dry heat at 121 °C for 15 minutes. Choice Nylon Syringe Filter Applications. HPLC and organic-solvent sample preparation and clean-up.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Target2™ Nylon Syringe Filter, 0.2µm, 17mm F2513-2 Target2™ Nylon Syringe Filter, 5.0µm, 30mm 723-2545 Nalgene™ 25mm Syringe Filters, CA; 0.8µm pore, Sterile 723-2580 Nalgene™ Syringe Prefilter Plus 722-2520 Documents & Downloads Certificates Request a Certificate Scientific Resources Brochures
These Corning syringe filters have acrylic copolymer housings, female luer lock inlets and male luer slip outlets. Polyethersulfone (PES) membranes provide the fastest flow rates, low protein binding and low extractables. 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic.
Acrodisc® PF Syringe Filters with Supor® Membrane, Sterile - 0.8/0.2 µm, 25 mm (50/pkg) Product ID 4187 Unit of Measure 1/EA Min Order Qty 1 Pore Size 0.8/0.2 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Hold-Up Volume <300 µL Membrane Material Supor (Hydrophilic polyethersulfone) Quantity 50 pkg
Advantec MFS. Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal.
Titan3 PVDF Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC-Certified PVDF. Titan3 PVDF Syringe Filter 0.45 µm, 17 mm, 200 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520.
MilliporeSigma™ Millex™-FG Syringe Filter Unit, Hydrophobic PTFE, 0.2 μm Features a hydrophobic Fluoropore™ (PTFE) membrane. Millex™-FG Syringe Filter, 0.20μm, Hydrophobic PTFE provides broad chemical compatibility and is ideal for filtering samples in organic solvents or to prevent back-streaming of atmospheric moisture in venting
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2 0.1µm to 5µm pore sizes Low adsorption characteristics Shop Minisart ® NML Syringe Filters
Millex ® hydrophilic PTFE syringe filters feature a polypropylene housing and a PTFE membrane, providing broad chemical compatibility regardless of your application. The table below shows solvents and solutions commonly used with Millex ® hydrophilic PTFE syringe filters – find our complete chemical compatibility list at Figure.
Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. 0.22 μm pore size Expand SLGV013SL MILLEX ® - GV Syringe Filter, 0.22 μm Hydrophilic PVDF, 13 mm, Sterile
Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO. Item no.: 17573----------K Price (USD): $161.00 50 Pieces Add to Cart Request a Quote* * 24 Hours Turnaround Time Save to List
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common
