The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical Related Products: Filter Membrane 0.45 Compare this item 1000mL Filter System, PES Filter, 0.45µm, 90mm, Sterile Denville
Sterile Opticap capsule filters are fully contained capsule filters with Durapore 0.22 µm or 0.1 µm hydrophilic PVDF membrane. The filters are sterilized by gamma irradiation prior to shipment, eliminating the need for autoclaving prior to use. They are available with a variety of inlet and outlet fittings to suit any sterile filtration
The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.
Description. For Sterile Filtration of Gases. Emflon PFRW cartridges are sterilizing grade hydrophobic membrane filters designed for reliable retention of bacteria and high levels of phages in compressed gas and vent applications. The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes
Syringeless and Syringe Filters Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE. Filter By category Filters and Filtration
Catalog number: CH2225-NP. Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Compare this item MILLEX® Sterile Syringe Filters Hydrophobic PTFE Membranes MilliporeSigma
Polyethersulfone (PES) membrane for high flow and low binding Two membrane pore sizes: 0.22µm or 0.45µm Filter systems include bottle top filter and solution bottle with cap Bottle top filters fit standard 45mm threaded solution storage bottles Packaged sterile (gamma irradiated) in bags Related Products: 0.45 Filter Compare this item
Apr 3, 2017 · Sterile Syringe Filters PTFE 25 mm Diameter 0.22 um Pore Size Individually Packaged 10/pk by Biomed Scientific Brand: Biomed Scientific 51 ratings | 3 answered questions $1299 ($1.30 / Item) Size: Sterile PTFE 25mm 0.22μm 10pcs Sterile PTFE 25mm 0.22μm 10pcs Sterile PTFE 25mm 0.22μm 100pcs Sterile PTFE 25mm 0.45μm 10pcs
Hawach hydrophobic PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. It is produced from food-grade isotactic polypropylene. No additives in the whole process; stable physical and chemical properties and good compatibility.
PTFE Unlaminated Membrane Filters. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated
The Proven Performance of Our Sterile Membrane Filters Microbial and Particulate-Free Design Filtration is used to remove particulate and contamination from fluids. Filtering through a 0.2 µm pore size is considered necessary to generate a sterile filtrate. Solutions for filtration can range in volume from just a few milliliters to many liters.
